| | | | |
| Blender Precision Modelling Tutorials |
| | | | |
| This
tutorial
series was created to assist Engineers and Artists get to grips with the basics of 'Blender' and
be able to use it to create accurate 3D models. To begin with, it
ignores the myriad of
animation, texturing and photo-realistic rendering tools and
concentrates solely on getting started and producing accurate models
for engineering and artistic purposes. |
| | | | |
|  | Getting Started |
| | |
| | This
details the sections of blender you will need to use and learn for the
process of modelling, the basic interface concepts and a few pointers
on accuracy. |
| | | Blenders Interface (Video Tutorial)
Getting Started (Video Tutorial) |
| | |
|
| | | | |
| | Modelling a 608 Bearing |
| | | | |
|  | This
tutorial will walk you through the basics of modelling with precision
with Blender and introduce you to the most commonly used modelling
tools.
|
| | Part 1 - Reference geometry. (Video Tutorial)
Part 2 - Detailing the cross section. (Video Tutorial)
Part 3 - Adding the Ball Bearings. (Video Tutorial)
Part 4 - Modelling
the Bearing Cage. (Video Tutorial)
Part 5 - Cage Securing Clasp.
Part
6 - Adding the Dust Shield.
Part 7 - Modelling the Circlip.
Part 8 - Low
vertices bearing.
Part 9 - Rendering the Bearing.
Part 10 - Creating a
Page Template.
Part 11 - Laying out the Bearing within the template.
|
| | | | |
| | Modelling A V-Roller |
| | | | |
|  | The
V-Roller tutorial is a continuation of the 608 Bearing tutorial and
covers a few of Blenders tools not covered in the 608 Bearing tutorial.
This section uses the bearings as the basis to accurately
construct an assembly of components. It extracts model geometry from
the Bearings as a base to construct the other components. |
| | Part 1 - Modelling The V-Roller.
Part 2 - Constructing the axle, washer and
nut.
Part 3 - Producing Detailed Threads.
Part 4 - Laying out the Assembly
Drawing.
|
| | |
| | | | |
| | Modelling a Support Casting |
| | | | |
|  | Following on from the V-Roller tutorial a casting is modelled using the V-Roller component assembly as a guide.
|
| | Part 1 - Laying out the component assembly
Part 2 - Initial casting
design
Part 3 - Support Brackets
Part 4 - Completing the casting
|
| | |
| | | | |
| | Blender Precision Modelling .PDF Guide |
| | | | |
|  | A combined E-Book containing all the above tutorials.
151 pages
4.8 M |
| | | | |
| | | | |
| | | | |
| | | | |
